facebook youtube linkedin |
ΕΛ
Contact us
ajax-loaderi SUBMIT
product_banner
PRODUCTS
WIREROPE GALVANIZED Φ5mm & Φ8mm

WIREROPE GALVANIZED Φ5mm & Φ8mm

They are galvanized wires of sufficient cross-section and strength to hold the corresponding loads. The combination of cables that tie the poles together, form the frame of the roof of the construction, which carries and holds the protective cover (anti-hail net, anti-rain cover). In addition, it is used for the connection and holding a perimeter pole to the anchor, via a tensioner.

  • Wire rope 5mm cross section:
    • structure: 1x19
    • minimum breaking load: 21.000N
  • Wire rope 8mm cross section:
    • structure: 6x7
    • minimum breaking load: 44,000N


    SIMILAR PRODUCTS

    BINDING ANCHORS Φ300Χ6Χ25Χ1500 mm

    BINDING ANCHORS Φ300Χ6Χ25Χ1500 mm

    It is a metal iron bar (Φ25x1500mm) with a helical flantze (Φ300x6mm) at its lower end, ...

    Details >
    ANTI-SINKING PLATE 250x140x4mm

    ANTI-SINKING PLATE 250x140x4mm

    It consists of two metal basis (250x140x4mm) which is attached to the pole improving its ...

    Details >
    WIRE TENDER U TYPE

    WIRE TENDER U TYPE

    It is a metal galvanized component, usually U-shaped, used for stretching the wire ropes ...

    Details >
    WIRE ROPE CLAMP 8mm

    WIRE ROPE CLAMP 8mm

    Wire rope clamp galvanized is being used in order to tie two wire ropes or in order to ...

    Details >
    CUPS FOR POLES 7x7,5 & 9x9,5

    CUPS FOR POLES 7x7,5 & 9x9,5

    It is a plastic cover that helps in avoiding damage to the anti-hail net and the anti-rain...

    Details >
    U-BOLT FOR POLE 9x9,5

    U-BOLT FOR POLE 9x9,5

    It is being attached to the perimeter poles to stabilize the wire rope U-Bolt for pole ...

    Details >